test

This error message is only visible to WordPress admins

Error: No feed with the ID 1 found.

Please go to the Instagram Feed settings page to create a feed.

Start to Finish #starttofinish

Part 3 and the most technical part of the build. Getting these very large and heavy #structuralsteel staircases through a small opening. But with the help of a very skilled crew, the install went off without a hitch!! #kingcrane #masseiconstructioninc #hcm #aerialphotography #structuralsteelstairs

Click on any image to launch slideshow

Start to Finish #starttofinish

This is part 2 of a pair of #structuralsteel stair cases that will eventually be installed in a three story custom home. We normally wouldn’t build out the entire staircases in the shop. They would be built in sections and then put together on the job site. Due to logistics these had to built in the shop, loaded on a flatbed truck and delivered to the site. No small task. But still doesn’t hold a candle to how we had to set them into place. Watch for part 3! 🤜🏻💥#structuralsteel #structuralsteelstairs #tonsoffun #masseiconstruction

Click any image to launch slideshow

Start to Finish – Interior Home Structural Steel Staircase Part #1

We’re going to start highlighting a few really cool projects from start to completion. This is part 1 of a pair of #structuralsteel stair cases that will eventually be installed in a three story custom home. It all starts with raw steel and then engineered, measured, cut, welded together and primed in the shop. #structuralsteel #structuralsteelstairs #tonsoffun#masseiconstruction

Click on any image to view the slideshow

Covid19

COVID19 COMPLIANCE AND TRAINING FOR OUR EMPLOYEES

  • Information on COVID-19, preventing spread, and who is especially vulnerable.
  • Self-screening at home, including temperature and/or symptom checks usingCDC guidelines.
  • The importance of not coming to work if workers have a cough, fever, difficulty breathing, chills, muscle pain, headache, sore throat, recent loss of taste or smell, congestion or runny nose, nausea or vomiting, or diarrhea, or if they or someone they had contact with has been diagnosed with COVID-19.
  • To return to work after a COVID-19 diagnosis only after 10 days since symptom onset and 72 hours of no fever.
  • When to seek medical attention.
  • The importance of hand washing.
  • The importance of physical distancing, both at work and off work time.
page1image2302960688
page1image2302961856
page2image2263464704
  • Proper use of cloth face covers, including information in the CDPH guidance.
  • Information on leave benefits, including the Families First Coronavirus Response Act and the Governor’s Executive Order N-51-20, and workers’ compensation benefits under the Governor’s Executive Order N-62-20 while that Order is in effect.
  • Train any independent contractors, temporary, or contract workers in these policies and ensure they have necessary PPE.
  • Cleaning and Disinfecting Protocols
  • Perform thorough cleaning in high traffic areas.
  • Frequently disinfect commonly used surfaces.
  • Clean and sanitize shared equipment between each use.
  • Clean touchable surfaces between shifts or between users, whichever is more frequent.
  • Require workers to wash hands or use sanitizer after using shared equipment.
  • Sanitize PPE at the end of the shift.
  • Avoid sharing phones, work tools, etc., wherever possible.
  • Provide adequate time for workers to clean during their shift.
  • Keep sanitary facilities operational and stocked at all times.
  • Provide additional toilets and hand washing stations if needed for physicaldistancing during breaks.
  • Ensure all water systems and features are safe to use after a prolonged facility shutdown.
  • Use products approved for use against COVID-19 on the Environmental Protection Agency (EPA)-approved list and train workers on chemical hazards, product instructions, ventilation requirements, and Cal/OSHA requirements. Follow CDPH asthma-safer cleaning methods.
  • Install hands-free devices if possible, including motion sensor sinks, soap dispensers, sanitizer dispensers, and paper towel dispensers.
  • Consider upgrades to improve air filtration and ventilation.
page2image2263722816
page2image2263723152
page3image2261712368

Physical Distancing Guidelines

  • Implement measures to ensure workers stay at least six feet apart.
  • Adjust on-site meetings to ensure physical distancing.
  • Limit the number of workers on the jobsite at one time if necessary.
  • Stagger worker breaks, if needed, to maintain physical distancing protocols.
  • Reconfigure break areas for physical distance.
  • Avoid congested areas at lunch.
  • Use the following hierarchy to prevent transmission of COVID-19 in production and other work areas: engineering controls, administrative controls, and PPE.

Core-ten Steel

Weathering steel is often referred to as COR-TEN steel. It’s a small group of steel alloys that were developed to eliminate the need for painting and form a stable rust-like appearance after several years of exposure to weather. Weathering steel is usually referred to by its trademark name COR-TEN (or simply Corten) and is known for its superior corrosion resistance and thickness. This is because the surface of the steel forms a protective oxide layer when exposed to the weather. In other words, the steel is allowed to rust in order to protect itself. This protective surface layer continues to regenerate over years of exposure. Handcrafted Metals can design a variety of applications using Core-ten for your new or existing design

Click on any image to launch slideshow

Spiral Staircases

Custom curved and spiral staircases combine aesthetic appeal with utilitarian value in both indoor and outdoor installations. They combine a mix of traditional and modern elements to make your home design unique. In areas where space is an issue, spiral staircases not only look better but are often safer as well. Handcrafted Metals Stairs are a centerpiece in any home and can be designed to suit your individual taste.

Custom Furniture & Lighting

Handcrafted Metals Inc has built custom one of kind pieces of furniture and lighting fixtures with steel and a variety of materials at its core. We’ve been fabricating beautiful, timeless furniture pieces (beds, tables, nightstands, light fixtures, and more) for more than two decades. Every piece of furniture and lighting piece we make is the result of inventive design, precise engineering, the best materials and finishes, and skillful craftsmanship. We love taking your ideas, combining fashion with function and creating unique pieces that compliment your space.

Click on any image to launch slideshow